Manual Select




Back / Lay Only: In order to speed up the time it takes to set the Grey Horse Bot up in Manual Mode we have added these options for pre-set configuration. So in the case above when you add a race (see later) it will automatically be pre-filled with the settings you establish here. When selecting a runner it will also automatically highlight it as a “back” or “lay” depending what you have set on this option.


Stake Type – This is the amount you want to bet no matter what odds.
If you put £5 in the box and the odds were 2.95 (lay), your liability would be:
(2.95 -1) X 5 = 9.75

Liability – Your stake is worked out on the odds on offer:
If you put in the box that your maximum liability is £10, and the odds on offer were 2.95, then your stake would be 10 / (2.95 -1) = £5.12.

Percent of Bank - The bot will take your current bank and divide it by the % you have used. Please remember the minimum bet rule of £2.00. Don’t try taking 1% of a £50 bank.

Ladder Stakes – (See earlier in the manual) for those of you that prefer to stake according to the odds you now can. This option is pretty limitless and will allow you to have a stake for just about as many odd ranges as you like. Please Note one thing here. Please do not overlap odds.



Lay Only
Lay Stake - This is the amount you want to stake on each race.

Low Lay Price – Minimum price you want to lay at.
High Lay Price – Maximum price you want to lay at


Back Only
Back Stake - This is the amount you want to stake on each race.

Odds Trigger Range
Left Box – Minimum price you want to back at.
Right Box – Maximum price you want to back at



Market Screens



This is where you get to set up the actual races which we refer to as “Markets”.

Clicking on the “Add Market” option above will open a screen similar to this.


You can select one market by clicking on the one you wish to load in or by holding down your “Ctrl” key you can select multiple races.

If you want to load in a range of markets simply click the first one in the range and while holding down your “Shift” key click on the last one in the range and they will all be highlighted ready to load in.


You can also filter the markets.

Once you have the markets that you wish to use then simply click “Ok”.